Payment & Shipping Terms:
|Connector Outer Diameter:||3.0mm, 2.0mm, 0.9mm Or Drop Cable 3.0*2.0mm||Connector:||FC, SC, LC|
|Polishing Type:||UPC, APC||Cores:||Simplex|
|Fiber:||SM, MM-OM1, MM-OM2, MM-OM3, MM-OM4||Material:||Plastic Housing, Metal Housing|
fiber optic cable connectors,
duplex fiber optic connector
Quick Connect Fiber Optic Connectors SC SM Field Installable FTTH Use
Quick connector fiber optic connectors provide a quick, simple and clean solution for field terminating SC connectors. The connectors provide a dual terminating solution for 0.25mm and 0.9mm diameter fibres. This two for one solution is achieved through a ‘stepped’ clamping method to the outer-coating of the fibre. With a connectorisation time of less than 30 seconds, including preparation, this field installable connector makes other connector termination methods appear cumbersome, time consuming and expensive.
With proven field-installable connector technology, fibre terminations using fast installable connectors are fast, easy and reliable. They are intended for field installation (no need for fibre splice management), repair and maintenance.
Field-installable connectors high-precision mechanical splice technology enables fibre optic networks to be installed quickly and cost effectively. Installation is very easy as strip, clean, cleave, insert and crimp! The factory polished ceramic ferrule provides superior quality for end-face geometry, offering a higher grade of performance for every field terminations.
We propose a full range of field-installable optical connector standard, fibres and cable (both standard and small-form-factor types, both PC and APC, both for 900 µm and for 3.0 mm reinforced cable). They are available for MM fibres and for SM one with superior optical and mechanical performances. With fast installation time (less than one minute) and low insertion loss, Focable system provides a good alternative to fusion splicing.
Excellent insertion loss, 0.3dB max.
Repeatable assembly up to 100 times
Visual inspection for proper installation
No internal mechanical splice
No epoxy and polish required
No tool and quick installation
Fiber connecting when FTTH project processing
Used to restore and maintenance when fiber-cut
Distribution in LAN area
Suitable for connecting with optic splice closure
Suitable for connecting with ODF, optical cross connection cabinet
|Fiber Cable Type||2.0mm, 3.0mm drop cable & 0.9mm tight buffer|
|Coupling type||Snap, Push Pull Type|
|Tight Buffer Diameter||250um|
|Fiber Mode||Single Mode|
|Insertion Loss||0.3dB Typical|
|Return Loss||APC >65dB|
|Temperature||-40℃ to +85℃|
Field Installable Connector, Optical Fiber Fast Connector, Quick Fiber Connector, Field Installable Connector, Field Assembly Connector
Contact Person: Lily